| Grade | H59 (C26800) |
| Temper | Annealed |
| Diameter | 6–150 mm |
| Stock | Contact for stock |
| MOQ | Flexible MOQ · 24h reply |
| Lead Time | 7-10 days |
| Certificate | ISO 9001, SGS, ASTM B103, EN 12164, GB/T 4423 |
Current stock covers diameter 6–150 mm. H59 is a low-cost α+β brass machined for hardware where strength matters more than corrosion margin. It is stocked for Precision fittings, valves and decorative hardware. We slit, cut and finish to order, with MTC documentation and 7-10 day dispatch on stocked sizes.
| Specification | Value |
|---|---|
| Temper | Annealed |
| Diameter | 6–150 mm |
| Cu | Pb | Fe | Ni | Sn | Zn |
|---|---|---|---|---|---|
| 57.0–60.0 | 3.0–6.0 | ≤0.50 | ≤1.00 | ≤0.05 | Balance |
| Property | Value |
|---|---|
| Tensile Strength | ≥340 MPa |
| Yield Strength | ≥165 MPa |
| Elongation | ≥40% |
| Hardness | ≤95 HB |
| Density | 8.50 g/cm³ |
1Each product is covered with PE protective film to prevent scratches and oxidation during transit and storage.
2Products are wrapped with moisture-proof paper and foam to provide cushioning and humidity protection.
3Steel strapping and corner protectors are applied to reinforce the package structure for heavy-duty transport.
4Each package is clearly labeled with product specifications, batch number, weight, and handling instructions.
1Confirm specs, quantity and lead time, sign PI, then schedule production after deposit received.
2Manufacturing with in-line quality checks; SGS/BV third-party inspection available upon request.
3Container booking, factory loading, and departure from Shanghai or Ningbo port.
4Customs declaration, Bill of Lading, and all export documents issued for smooth clearance.
MOQ is flexible and set per project. Tell us your quantity and we will confirm availability and pricing within 24 hours.
Standard lead time is 7-10 days. Exact delivery depends on specification, quantity, and current production schedule. Contact us for a firm delivery date on your order.
H59 (C26800) are available for this product. We stock a wide range of industrial grades and can source specialty specifications on request. Contact us for the full grade list and availability.
Yes. Every shipment includes a mill test certificate documenting chemical composition and mechanical properties. EN 10204 3.1 inspection documents are available on request, and third-party inspection by SGS, BV, or Intertek can be arranged.
Bars are available hot-rolled, peeled or turned, and polished or ground on request. Hex and square sections are typically supplied cold-drawn for tighter tolerances and a cleaner surface.
